|
SYSTEM
|
TYPE
|
DATE
|
DESCRIPTION
|
|
|
|
|
|
|
Application
|
Update
|
2014.07.10
|
Build
N2B24.1333 / ServicePack14L : Released
|
|
ASE Alignments
|
Repair
|
2014.07.10
|
The ASE Control Layers preferences dialog will no longer lock
Civil 3D resulting in a forced crash, when the dialog is called but there
are no qualifying layers in the drawing containing valid objects that may
be used for alignment definition. Instead of a lock-up, an error message is
displayed describing the problem and providing a recommendation for
resolving the issue.
|
|
ASE >> Autodesk Alignments
|
Repair
|
2014.07.10
|
ASE alignments translated to the Civil 3D format will now
include the entire definition, instead of only the first linear segment,
ending at the first arc.
|
|
ASE Alignments
|
Repair
|
2014.07.10
|
If the ASE alignment definition preferences dialog is called,
but no alignments have yet been defined, the current drawing will be
established as the alignment control drawing and the dialog will display.
Previously during this condition, the dialog would not display and an error
message would be generated. The user would be forced to run another command
to establish the current drawing as the ASE alignment control file before
the definition preferences dialog could be displayed.
|
|
Profile Generator
|
Removal
|
2014.07.01
|
The enhancement which automatically creates the drawing file
that may be used to generate the full profile has been disabled. After
additional controls are provided to allow user-specifications, the feature
will be restored.
|
|
Application
|
Update
|
2014.06.17
|
Build
N2B24.1333 / ServicePack14K : Released
|
|
3d Road Modeling
|
Enhancement
|
2014.06.17
|
A new assembly was added to the template library to accommodate
a client request.
|
|
Profile Generator
|
Enhancement
|
2014.05.23
|
When paving data is exported, ASE Civil now automatically
creates the drawing file that may be used to generate the full profile for
the given alignment. ASE uses a template drawing contained in the ASE
install folder.
|
|
Application
|
Update
|
2014.04.24
|
Build
N2B24.1333 / ServicePack14H : Released
|
|
ASE Alignments
|
Repair
|
2014.05.15
|
Modifications were made to the alignment data security
algorithms to prevent the alignment control specifications lock file from
being established and applied prematurely.
|
|
Paving Management
|
Enhancement
|
2014.05.23
|
Finished profile drawing files are now created automatically
after exporting paving design data from the design drawing.
|
|
Application
|
Optimization
|
2014.05.20
|
Refactored “space-switching” algorithms to make overall system
processing faster and more stable.
|
|
Surface Management
|
Repair
|
2014.05.27
|
Fixed a .NET error that occurred whenever the dialog was closed
without making changes, using the “Cancel” button.
|
|
ASE Alignments
|
Repair
|
2014.04.22
|
Repaired the “ASE to Autodesk” alignment translation command to
reflect the correct curve directions. Previously, the ASE alignment arcs
segments were being translated incorrectly after Autodesk made an internal
change to the way arcs were handled and/or defined in the program.
|
|
Application
|
Update
|
2014.04.24
|
Build
N2A22.1627 / ServicePack14A : Released
|
|
Surface Mgt
|
Enhancement
|
2014.04.22
|
The surface management toolbar has been enhanced to include the
current data path, a button to call the surface options dialog and the name
of the active FG surface (top or datum)
|
|
Surface Mgt
|
Enhancement
|
2014.04.22
|
ASE will now create either a FG top or FG datum surface, depending
on the active value of the 3D Road Modeling output surface setting
|
|
Surface Mgt
|
Enhancement
|
2014.04.22
|
A new dialog was added to allow users to customize the names of
the FG surfaces created by ASE
|
|
Profile Generator
|
Reconfiguration
|
2014.04.19
|
Modified so Generated profiles cannot be created in a drawing
containing Design Markers
|
|
Ribbon
|
Enhancement
|
2014.04.19
|
Reconfigured "Information" panel of [Tools] tab
|
|
Ribbon
|
Enhancement
|
2014.04.19
|
Added "Knowledge Base" button to
"Information" panel of [Tools] tab
|
|
Ribbon
|
Enhancement
|
2014.04.19
|
Added "Paving Tips" command to "Paving
Help" panel of [Paving Mgt] tab
|
|
Ribbon
|
Enhancement
|
2014.04.19
|
Added "Paving Help" panel to [Paving Mgt] tab
|
|
Surface Mgt
|
Repair
|
2014.04.22
|
Surface management is no longer invoked after exporting data
for the site
|
|
Paving Help
|
Enhancement
|
2014.04.15
|
Paving feature recommendations was enhanced and is now
available via the ribbon
|
|
Plan Labels
|
Enhancement
|
2014.04.01
|
Paving labels update dynamically when gripped or moved
|
|
Compatibility
|
Enhancement
|
2014.04.01
|
ASE Civil 2014 is now also compatible with Civil 3D 2013
|
|
Pads
|
Reconfiguration
|
2014.04.22
|
The "Alignment" panel, which contains the commands
used to set an alignment current and/or un-twist the view before exporting
data or defining paving features, was added to the "Pads" ribbon
tab for quicker access when attaching pads to alignments
|
|
Pads
|
Technical
|
140405
|
Added BMC condition for setting "Batch" definition
mode
|
|
Administration
|
Reconfiguration
|
140419
|
Removed system DIALOGADMIN. Replaced with website link to
paving features definition tips
|
|
System
|
Reconfiguration
|
2014.04.21
|
Integrated a service pack system that will search the install
folder for a file that will contain program updates and repairs. The will
allow changes to ASE without reinstalling the entire program
|
|
3d Road Modeling
|
Technical
|
2014.04.22
|
Active 3D Road Model output surface type information is now
passively updated to the registry to provide input to .NET for determining
the applicable name for FG surface builds
|
|
Application
|
Update
|
2014.02.13
|
Build
N1B12.0745 : Updated
|
|
Pads
|
Repair
|
2014.04.05
|
“Batch” mode for pad
definition can now be switched to “Selective” mode.
|
|
Pads
|
Technical
|
2014.04.05
|
Selection of “Batch” mode for pad definition is only allowed if
BMC data is available.
|
|
Application
|
Compatibility
|
2014.03.11
|
Repaired Autodesk library references to complete & repair
compatibility issues with the current surface selection dialog.
|
|
Utilities
|
Technical
|
2014.02.20
|
Source code refactoring, addition of new classes & methods
|
|
Folders and Files
|
Repair
|
2014.02.18
|
Discontinued the proliferation of the creation of the ‘zCsData’ folder.
|
|
Application
|
Update
|
2014.02.13
|
Build
N1B12.0745 : Released for design, production & trial
evaluation use
|
|
Licensing
|
Modification
|
2013.11.00
|
Security update
|
|
Information
|
Correction
|
2014.02.10
|
"About ASE" dialog was modified to display the
correct URL for program downloads.
|
|
Authorization
|
Reconfiguration
|
2014.04.21
|
Modified the wall symbol size scaling to 4.
|
|
Authorization
|
Reconfiguration
|
2014.04.21
|
Modified the contact information for technical support in an
authorization error dialog.
|
|
Authorization
|
Reconfiguration
|
2014.04.21
|
Made adjustments to the sequence of loading client information.
|
|
Command
|
User Info
|
2014.02.11
|
A new function was created to serve as a message service for
ribbon panels and command buttons that are currently not in service
|
|
Ribbon
|
Enhancement
|
2014.02.08
|
The
ASE Civil ribbon now includes storm drain pipes and MAG501-series headwalls.
|
|
Utilities
|
Enhancement
|
2014.02.08
|
Dynamic
Utility System Integration – Phase IIa: A
‘slider’ has been added to the ‘Storm Pipe Properties’ dialog. The new
‘Pattern Scale’ control allows the user to adjust the frequency of the storm
drain hatch pattern located between the pipe walls. Each pipe’s pattern
scale can be controlled independently. The default scale is ‘1’.
|
|
Utilities
|
Enhancement
|
2014.01.28
|
Dynamic
Utility System Integration – Phase II: The MAG501 headwall series can be added to a drawing from the ASE
ribbon. After selecting the location for the symbol, the headwall is sized
and oriented in either of following ways:
1) Standalone
Headwalls:
The pipe size to be accommodated is
selected from a dialog which displays the MAG ‘Headwall Dimensions’ Detail
501-2.
2) Snapped
to ASE Storm Drain Pipe Endpoints:
When The user snaps to the end of a
storm drain pipe created with ASE Civil, the headwall is oriented and sized
automatically to fit the pipe. If the pipe is moved, rotated or stretched,
the headwall location and orientation is instantly updated. If the pipe is
resized using the ASE dialog, the headwall is automatically resized to fit
with respect to the MAG specifications.
Note: The
reactive, persistent behavior of the headwalls and pipes can only be
achieved when the items are created from the ASE ribbon. Manual insertion,
drawing or attempting to join headwalls to pipes without using the ASE
ribbon will not yield the expected behavior.
|
|
Utilities
|
Enhancement
|
2014.01.14
|
Dynamic
Utility System Integration – Phase I: Self-Assembling, Storm drain pipes can now be created by using the mouse to
select the starting and ending pipe locations. Pipe positions and lengths
may be edited via AutoCAD ‘GRIPS’, 'MOVE', 'ROTATE', 'STRETCH' or 'EXTEND'
commands. Pipes are re-sizeable via double-clicking the pipe centerline to
access the ‘Storm Pipe Properties’ dialog. The pipe material and ID may
also be modified from the dialog. The storm drain pipes are fully
dynamic. This means that their appearance is maintained automatically
when edited by the user in any way using standard AutoCAD commands. If a
pipe is moved, rotated, stretched or re-sized, ASE instantly reconstructs
the pipe with respect to its new location, size and/or length. All pipe editing must be performed
on the centerline element. This component of the storm
pipe assembly serves as a link to the pipe's data, which is stored in the
ASE project data folder.
|
|
Scaling
|
Repair
|
2014.01.05
|
The drawing scaling function of ASE was modified
to resolve data compatibility conflicts related to recent changes in the
profile display system.
|
|
Data
Path
|
Enhancement
|
2014.01.03
|
A temporary
data path is set automatically when ASE Civil commands are invoked in a
drawing in which no data path has been explicitly assigned.
|
|
Ribbon
|
Enhancement
|
2013.12.26
|
All Pad
settings and commands are now available from the ASE Civil ribbon
|
|
Pad
Design
|
Enhancement
|
2013.12.09
|
All
the Pads on a site can now be defined and labeled simultaneously through a
batch process which is controlled in the Pad settings
|
|
Profile Display
|
Repair
|
2011.11.18
|
The “Display Limits” command behavior has been
restored to its original design specifications
|
|
Pad Design
|
Technical
|
2013.11.23
|
A new function was added which calculates the
regional center-point of a closed Polyline.
|
|
Application
|
Update
|
2013.11.18
|
Build M4B11.0531 : Released for design,
production & trial evaluation use
|
|
Ribbon
|
Enhancement
|
2013.11.00
|
"Flow Labels" and "Links" panels were added
to ASE's "Design" ribbon tab
|
|
Paving Design
|
Enhancement
|
2013.11.13
|
The alignment association management function now sorts all
discovered alignments and will include re-association of both Civil 3D and
ASE Civil alignments. The feature may be accessed by typing
"RPDB" at the command prompt
|
|
Installation
|
Reconfiguration
|
2013.11.00
|
Due to install folder changes, support files location
references required adjustments for accessibility
|
|
Pad Design
|
Reconfiguration
|
2013.11.00
|
Due to install folder changes, support files location
references required adjustments for accessibility
|
|
Authorization
|
Refinement
|
2013.11.00
|
Unregistered/unauthorized usage checking was reduced via
time-delay algorithm
|
|
Initialization
|
Enhancement
|
2013.11.00
|
A splash screen is briefly displayed to indicate ASE Civil's
status and indicate the current version in use
|
|
Profile Display
|
Enhancement
|
2013.11.00
|
Processing speed of creation and adjustment functions have been
increased
|
|
Paving Labels
|
Enhancement
|
2013.11.00
|
There are no longer any text style restrictions that require
the use of "L100" or "L120" legacy text styles
|
|
Paving Design
|
Enhancement
|
2013.11.00
|
The available offset tolerance values have been increased to
100' to accommodate larger site layout transition geometry
|
|
Scaling
|
Repair
|
2013.11.00
|
The drawing scaling function of ASE was repaired to ensure that
a valid scale value would always be returned from the 'CustomScale'
property of the associated space or viewport
|
|
Scaling
|
Enhancement
|
2013.11.00
|
The dependency on Auto Cad's "LTSCALE" system
variable has been removed for all ASE Civil design and production systems.
The "ANNOTATIVE" scale of ModelSpace or the display scale of
floating View ports in a Paper Space Layout now control the scaling for all
ASE systems and objects that are not explicitly controlled by program
preferences but were a function of the system variable
|
|
Paving Design
|
Repair
|
2013.11.00
|
Access to ASE Design Marker-2 has been restored
|
|
File Handling
|
Enhancement
|
2013.11.00
|
Drive searching has been eliminated for legacy activities to
reduce processing time
|
|
Paving Design
|
Enhancement
|
2013.11.00
|
A utility has been integrated which allows the designer to
associate a new alignment name with paving data that was previously defined
using a different alignment name. The function may be accessed by typing
"RPDB" at the command prompt
|
|
Paving Labels
|
Repair
|
2013.11.00
|
Grade label support file access has been restored
|
|
Profile Generator
|
Repair
|
2013.11.00
|
Support file access has been restored
|
|
Processing
|
Refinement
|
2013.11.00
|
Removed duplicated functions found in the paving plan labeling
classes
|
|
Processing
|
Refinement
|
2013.11.00
|
Updated paving grade labeling functions so the support symbols
could be located in the new install folder location
|
|
Processing
|
Repair
|
2013.11.00
|
The function which translates an AutoCAD object's geometry to
an ASE object format caused failures during ASE alignment definition due to
a parameter that does not work consistently from system to system
|
|
Geometric Analysis
|
Repair
|
2013.11.00
|
A geometric support function which checks for the presence of a
coordinate on an arc returned data in an incorrect format, which adversely
affected a variety of functions, such as 3D Road Model generation, profile
generation and true-length and true-grade calculations, among others.
|
|
Geometric Analysis
|
Refinement
|
2013.11.00
|
A geometric function which calculates the presence of a given
point on an arc was added
|
|
Processing
|
Repair
|
2013.11.00
|
The master block reference could not be found when creating
Design Profile Views in a drawing for the first time
|
|
Design Markers
|
Repair
|
2013.11.00
|
The master Design Marker block reference could not be found
when setting Markers in a drawing for the first time
|
|
Licensing
|
Modification
|
2013.11.00
|
Security update
|
|
Information
|
Refinement
|
2013.11.00
|
"About ASE" dialog was reconfigured into a tabular
format using a .NET form
|
|
Processing
|
Refinement
|
2013.11.00
|
A new function was integrated to support accessing the layers
collection object
|
|
Processing
|
Refinement
|
2013.11.00
|
A new function was integrated to support accessing the blocks
collection object
|
|
Geometric Analysis
|
Technical
|
|
A .NET function which retrieves the midpoint of an arc was
duplicated in Visual Lisp code to accommodate ASE/C3D 2010 users that
experienced problems in .NET
|
|
|
|
|
|
|
|
|
|
